[strongSwan] Conn linux roadwarrior, psk, nat,

[Ireneusz Smoczkiewicz]

Hi all.
I've made my config to connect to Linksys RV082. It's how it looks like:

config setup
	plutodebug=all
	# crlcheckinterval=600
	# strictcrlpolicy=yes
	# cachecrls=yes
	nat_traversal=yes
	charonstart=yes
	plutostart=yes


conn mycon
      authby=secret
      auth=esp
      pfs=yes
      keyingtries=1
      ike=3des-md5-modp1024
      esp=3des-md5
      left=%defaultroute
      leftsubnet=192.168.0.0/24
      right=83.XX.XXX.XXX
      rightsubnet=192.168.98.0/24
      auto=add

But I'm getting nowhere with this. Om my console I see:
...
sending packet: from 192.168.0.104[500] to 83.XX.XXX.XXX[500]
giving up after 5 retransmits
establishing IKE_SA failed, peer not responding

On remote gateway in logs I can see:

[Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Dec 25 21:19:34 2011     VPN Log    [Tunnel Negotiation Info] Inbound
SPI value = 2d9e202d
Dec 25 21:19:34 2011     VPN Log    [Tunnel Negotiation Info] Outbound
SPI value = 10c2b009
Dec 25 21:19:34 2011     VPN Log    [Tunnel Negotiation Info] >>>
Responder send Quick Mode 2nd packet
Dec 25 21:19:34 2011     VPN Log    [Tunnel Negotiation Info] <<<
Responder Received Quick Mode 3rd packet
Dec 25 21:19:34 2011     VPN Log    [Tunnel Negotiation Info] Quick
Mode Phase 2 SA Established, IPSec Tunnel Connected
Dec 25 21:19:34 2011     VPN Log    Dead Peer Detection Start, DPD
delay timer=10 sec timeout=10 sec
Dec 25 21:19:34 2011     VPN Log    ignoring Delete SA payload: IPSEC
SA not found (maybe expired)
.....
Dec 25 21:19:34 2011     VPN Log    ignoring Delete SA payload: IPSEC
SA not found (maybe expired)

Please help me - I've stuck :(
Thanks

-- 
Ireneusz Smoczkiewicz