[strongSwan] Parameters to connect to a Cisco 3000 series

Hugo Mora humoib at gmail.com
Tue Dec 13 16:52:06 CET 2011


I'm not an expert on VPNs (java programmer), but I need to connect using
StrongSwan my company with a client via VPN. They have send me these
parameters (see below)... Could someone pleeease translate these parameters
to a ipsec.conf connection ??

I know that the remote site is a CISCO VPN 3000 Series.

Really, thank you so much! I can't buy a CISCO

*IKE Parameters*
Authentication: Preshared keys
Authentication Algorithm: SHA/HMAC-160
Encryption Algorithm: 3DES
Diffie-Hellman Group: 2 (1024 bits)
Lifetime Measurement: Time (86400) sec
IKE peer: x.x.x.x
Negotiation mode: main

*IPSEC Parameters*
Authentication Algorithm: ESP/SHA-HMAC-160
Encryption Algorithm: 3DES
Mode: Tunnel
Lifetime Measurement: Time (3600) sec.
PFS: Group 2 (1024 bits)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20111213/7076e345/attachment.html>

More information about the Users mailing list