[strongSwan] ip6-in-ip6 tunnel problem

[Andreas Steffen]

Hi Chris,

unfortunately the Linux IPv6 networking stack does not support
the src parameter, therefore the automatic insertion of src
routes on the gateway is not possible.

Regards

Andreas

On 24.09.2010 13:12, Chris Ryan wrote:
> Hi,
> 
>> Try
>>   ping6 -I 2002:10::1 2002:20::1
>> instead.
> 
> Thanks, this works. So, every ip6 application has to set the local red
> net address as the source ip to get the packets tunneled? Isn't there
> any system wide option to set to enforce that? In IP4, the strongswan
> generated entries in routing table 220 contain a "src" with red net
> interface address, which is missing in the equivalent.
> 
> Thanks for your patience.
> 
> Have a nice weekend,
> Chris.

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==