[strongSwan] Rekey issue when strongswan is initiating rekey

[Arun Raj]

Thanks Martin,

Its working fine now :)

Regards
Arun 

-----Original Message-----
From: Martin Willi [mailto:martin at strongswan.org] 
Sent: Friday, June 04, 2010 5:41 PM
To: Arun Raj
Cc: users at lists.strongswan.org; Venkat Kalidindi; Lakshmi Sankaran
Subject: Re: [strongSwan] Rekey issue when strongswan is initiating
rekey

Hi Arun,

> Due to this , each Phase1 rekey is like tearing down existing session 
> and setting up new one

By default, strongSwan uses a reauthentication procedure to verify the
credentials. This reauthentication establishes the whole IKE_SA from
scratch.
To use normal rekeying, add

   reauth=no

to your configuration.

Regards
Martin