[strongSwan] SA failed while configuring through stroke message

MANORANJAN S manoranjan.s123 at gmail.com
Thu Apr 8 10:09:25 CEST 2010

Hi All,

I am trying to set up SA( ikev2 ) by installing strongswan4.3.5 in two linux
I have configured connection using stroke message:

./stroke add mano 2

where and are two linux machine ip and and
are the subnets.

I am getting following error while SA establishment.

Please let me know is there any more stroke command to be run for successful

[root at manoranjan stroke]# ./stroke up mano
initiating IKE_SA mano[1] to
generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) ]
sending packet: from[500] to[500]
received packet: from[500] to[500]
parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP)
authentication of '' (myself) with pre-shared key
establishing CHILD_SA mano
generating IKE_AUTH request 1 [ IDi IDr AUTH N(USE_TRANSP) SA TSi TSr
sending packet: from[4500] to[4500]
received packet: from[4500] to[4500]
parsed IKE_AUTH response 1 [ N(AUTH_FAILED) ]
received AUTHENTICATION_FAILED notify error
[root at manoranjan stroke]# ls

Manoranjan S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20100408/b6431c7a/attachment.html>

More information about the Users mailing list