[strongSwan-dev] [StrongSwan]: Traffic narrowing for IKEv2

jegathesh malaiyappan mjegakathir at gmail.com
Tue Dec 18 19:15:51 CET 2012


thanks lot for your clarification...

On Tue, Dec 18, 2012 at 11:43 PM, Andreas Steffen <
andreas.steffen at strongswan.org> wrote:

> On 18.12.2012 19:04, jegathesh malaiyappan wrote:
>
>> Hi,
>>
>> I need a clarification on IKEv2 traffic narrowing.
>>
>> NodeA
>> ------------------------------**------------------------------**--------
>> SGW
>>
>> Responder initiator& responder
>>
>> 60.60.60.1 - 60.60.60.254   ---- 24
>>                                           60.60.60.1 - 60.60.63.254
>> ------ 22
>>
>> Both the peers are configured , support different address range. It has
>> to narrowing the traffic and decide traffic selector.
>>
>>
>> Please clarify me the following,
>>
>>        i) is it always narrow to smaller subnet and use that address
>> range ... in the above ex ... 60.60.60.0/24 ?
>>
>>  The narrowing happens always to the smaller network, i.e 60.60.60.0/24
>
>
>         ii) is this traffic narrowing differ based on responder
>> configured bigger network and initiator configured smaller network?
>>
>>  If the initiator suggests a smaller network then this is selected.
> No "broadening" ever happesn.
>
>
>> Thanks.
>>
>>
>> --
>> By
>> Jegathesh,
>>
>
> Regards
>
> Andreas
>
> ==============================**==============================**==========
> Andreas Steffen                         andreas.steffen at strongswan.org
> strongSwan - the Linux VPN Solution!                www.strongswan.org
> Institute for Internet Technologies and Applications
> University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ==============================**=============================[**ITA-HSR]==
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/dev/attachments/20121218/64f958b0/attachment.html>


More information about the Dev mailing list