<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<br>
<br>
<div class="moz-cite-prefix">On 2/7/2018 9:22 AM, Sujoy wrote:<br>
</div>
<blockquote type="cite"
cite="mid:ed47c3e7-77cb-eb89-8921-202ed5ddca9c@mindlogicx.com">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<p>Thanks Jafar, for the reply. But after removing subnet from the
config also tunneling failed. Is there any issue with the
version of strongswan 5.3.3. What means "TS_UNACCEPTABLE notify,
no CHILD_SA built"<br>
</p>
</blockquote>
"TS_UNACCEPTABLE notify" means the peer didn't like the proposed
traffic selector. The log shows that your IKE SA is up, so you
don't have a problem there. I can't tell you what your rightsubnet
should be unless you tell us more about the setup you have. What is
your peer running? is it also strongSwan? <br>
<br>
If you only want to encrypt traffic from 192.168.10.38 to
192.168.10.40 and you don't have other subnets/hosts, you can switch
the connection type to transport mode ("type=trasnport"). Both sides
must agree on this. transport doesn't require left/rightsubnets. <br>
<br>
--Jafar<br>
<br>
<blockquote type="cite"
cite="mid:ed47c3e7-77cb-eb89-8921-202ed5ddca9c@mindlogicx.com">
<p> </p>
<p> <br>
</p>
<p> Config setup<br>
</p>
<p> charondebug="all"<br>
uniqueids=yes<br>
strictcrlpolicy=yes<br>
conn %default<br>
conn tunnel #<br>
left=%any<br>
right=192.168.10.40<br>
ike=aes256-sha1-modp2048!<br>
esp=aes256-sha1-modp2048!<br>
keyingtries=1<br>
ikelifetime=1h<br>
lifetime=8h<br>
dpddelay=30<br>
#dpdtimeout=120<br>
dpdaction=restart<br>
authby=secret<br>
auto=route<br>
keyexchange=ikev2<br>
type=tunnel<br>
<br>
</p>
<p><br>
</p>
<p>root@client:~# ipsec up tunnel<br>
initiating IKE_SA tunnel[1] to 192.168.10.40<br>
generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP)
N(NATD_D_IP) N(HASH_ALG) ]<br>
sending packet: from 192.168.10.38[500] to 192.168.10.40[500]
(448 bytes)<br>
received packet: from 192.168.10.40[500] to 192.168.10.38[500]
(456 bytes)<br>
parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP)
N(NATD_D_IP) N(HASH_ALG) N(MULT_AUTH) ]<br>
remote host is behind NAT<br>
no IDi configured, fall back on IP address<br>
authentication of '192.168.10.38' (myself) with pre-shared key<br>
establishing CHILD_SA tunnel<br>
generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) IDr AUTH SA
TSi TSr N(MOBIKE_SUP) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR)
N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR)
N(ADD_4_ADDR) N(MULT_AUTH) N(EAP_ONLY) ]<br>
sending packet: from 192.168.10.38[4500] to 192.168.10.40[4500]
(348 bytes)<br>
received packet: from 192.168.10.40[4500] to 192.168.10.38[4500]
(156 bytes)<br>
parsed IKE_AUTH response 1 [ IDr AUTH N(AUTH_LFT) N(MOBIKE_SUP)
N(ADD_4_ADDR) N(TS_UNACCEPT) ]<br>
authentication of '192.168.10.40' with pre-shared key successful<br>
IKE_SA tunnel[1] established between
192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]<br>
scheduling reauthentication in 2819s<br>
maximum IKE_SA lifetime 3359s<br>
<b>received TS_UNACCEPTABLE notify, no CHILD_SA built</b><b><br>
</b><b>failed to establish CHILD_SA, keeping IKE_SA</b><br>
received AUTH_LIFETIME of 2637s, scheduling reauthentication in
2097s<br>
peer supports MOBIKE<br>
establishing connection 'tunnel' failed<br>
</p>
<p><br>
</p>
<p>root@client:~# ipsec statusall<br>
Status of IKE charon daemon <b>(strongSwan 5.3.3, Linux
4.4.0-112-generic, x86_64)</b>:<br>
uptime: 2 minutes, since Feb 07 20:44:23 2018<br>
malloc: sbrk 2703360, mmap 0, used 519600, free 2183760<br>
worker threads: 7 of 16 idle, 5/0/4/0 working, job queue:
0/0/0/0, scheduled: 4<br>
loaded plugins: charon aes kernel-libipsec des rc2 sha1 sha2
md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs7
pkcs8 pkcs12 pgp dnskey sshkey pem openssl fips-prf gmp xcbc
cmac hmac curl attr kernel-netlink resolve socket-default stroke
updown xauth-generic<br>
Listening IP addresses:<br>
192.168.10.38<br>
192.168.3.107<br>
<br>
Connections:<br>
tunnel: %any...192.168.10.40 IKEv2, dpddelay=30s<br>
tunnel: local: uses pre-shared key authentication<br>
tunnel: remote: [192.168.10.40] uses pre-shared key
authentication<br>
tunnel: child: dynamic === dynamic TUNNEL,
dpdaction=restart<br>
Security Associations (1 up, 0 connecting):<br>
tunnel[1]: ESTABLISHED 2 minutes ago,
192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]<br>
tunnel[1]: IKEv2 SPIs: 175dcf9cdcf11b38_i*
9cc05896738a5e45_r, pre-shared key reauthentication in 32
minutes<br>
tunnel[1]: IKE proposal:
AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_2048<br>
<br>
</p>
<div class="moz-signature">Thanks<br>
<br>
</div>
<div class="moz-cite-prefix">On Wednesday 07 February 2018 08:31
PM, Jafar Al-Gharaibeh wrote:<br>
</div>
<blockquote type="cite"
cite="mid:090b72a6-679e-4426-00d7-36b56ab71f2c@atcorp.com">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
Sujoy,<br>
<br>
Are you sure about <br>
<br>
rightsubnet=192.168.10.0/32<br>
<br>
This subnet gets you nothing unless you know that it has a
special meaning in the config that I'm not aware of. You can
have the least significant octet set to zero with a 32-bit
netmask. What is the rightsubnet that you are trying to protect?
is it all 192.168.10.0/24? or just one host like
192.168.10.100?<br>
<br>
--Jafar<br>
<br>
<br>
<br>
<div class="moz-cite-prefix">On 2/7/2018 12:44 AM, Sujoy wrote:<br>
</div>
<blockquote type="cite"
cite="mid:2e766137-1a09-0455-12f6-1211cd7bfa85@mindlogicx.com">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p>Hi Noel,</p>
<p>Still cannot establish tunnel. logs doesn't show anything.
Can someone help to solve this. <br>
</p>
<p>Client configuration</p>
<p>config setup<br>
</p>
<p> charondebug="all"<br>
uniqueids=yes<br>
strictcrlpolicy=no<br>
conn %default<br>
conn tunnel #<br>
left=%any<br>
right=192.168.10.40<br>
rightsubnet=192.168.10.0/32<br>
ike=aes128-md5-modp1536<br>
esp=aes128-sha1<br>
keyingtries=%forever<br>
ikelifetime=1h<br>
lifetime=8h<br>
dpddelay=30<br>
#dpdtimeout=120<br>
#dpdaction=restart<br>
authby=secret<br>
auto=start<br>
keyexchange=ikev2<br>
type=tunnel<br>
mobike=no<br>
#pfs=no<br>
reauth=no<br>
<br>
</p>
<p>Server setup</p>
<p>config setup<br>
</p>
<p> charondebug="all"<br>
uniqueids=yes<br>
strictcrlpolicy=no<br>
conn %default<br>
conn tunnel #conn %default<br>
conn tunnel #<br>
left=%any<br>
right=192.168.10.40<br>
rightsubnet=192.168.10.0/32<br>
ike=aes128-md5-modp1536<br>
esp=aes128-sha1<br>
keyingtries=%forever<br>
ikelifetime=1h<br>
lifetime=8h<br>
dpddelay=30<br>
#dpdtimeout=120<br>
#dpdaction=restart<br>
authby=secret<br>
auto=start<br>
keyexchange=ikev2<br>
type=tunnel<br>
mobike=no<br>
#pfs=no<br>
reauth=no<br>
</p>
<p><br>
</p>
<div class="moz-signature">root@client:~# <b>ipsec up tunnel</b><br>
initiating IKE_SA tunnel[2] to 192.168.10.40<br>
generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP)
N(NATD_D_IP) N(HASH_ALG) ]<br>
sending packet: from 192.168.10.38[500] to
192.168.10.40[500] (1064 bytes)<br>
received packet: from 192.168.10.40[500] to
192.168.10.38[500] (38 bytes)<br>
parsed IKE_SA_INIT response 0 [ N(INVAL_KE) ]<br>
peer didn't accept DH group MODP_2048, it requested
MODP_1536<br>
initiating IKE_SA tunnel[2] to 192.168.10.40<br>
generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP)
N(NATD_D_IP) N(HASH_ALG) ]<br>
sending packet: from 192.168.10.38[500] to
192.168.10.40[500] (1000 bytes)<br>
received packet: from 192.168.10.40[500] to
192.168.10.38[500] (392 bytes)<br>
parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP)
N(NATD_D_IP) N(HASH_ALG) N(MULT_AUTH) ]<br>
remote host is behind NAT<br>
no IDi configured, fall back on IP address<br>
authentication of '192.168.10.38' (myself) with pre-shared
key<br>
establishing CHILD_SA tunnel<br>
generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) IDr AUTH
SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) ]<br>
sending packet: from 192.168.10.38[4500] to
192.168.10.40[4500] (332 bytes)<br>
received packet: from 192.168.10.40[4500] to
192.168.10.38[4500] (108 bytes)<br>
parsed IKE_AUTH response 1 [ IDr AUTH N(TS_UNACCEPT) ]<br>
authentication of '192.168.10.40' with pre-shared key
successful<br>
IKE_SA tunnel[2] established between
192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]<br>
scheduling rekeying in 2525s<br>
maximum IKE_SA lifetime 3065s<br>
<b>received TS_UNACCEPTABLE notify, no CHILD_SA built</b><b><br>
</b><b>failed to establish CHILD_SA, keeping IKE_SA</b><b><br>
</b><b>establishing connection 'tunnel' failed</b><br>
root@client:~# <br>
<br>
<br>
Ipsec statusall<br>
<br>
Status of IKE charon daemon (<b>strongSwan 5.3.3, Linux
4.4.0-112-generic, x86_64</b>):<br>
uptime: 41 seconds, since Feb 07 12:08:32 2018<br>
malloc: sbrk 2703360, mmap 0, used 519216, free 2184144<br>
worker threads: 7 of 16 idle, 5/0/4/0 working, job queue:
0/0/0/0, scheduled: 2<br>
loaded plugins: charon aes kernel-libipsec des rc2 sha1
sha2 md5 random nonce x509 revocation constraints pubkey
pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey sshkey pem openssl
fips-prf gmp xcbc cmac hmac curl attr kernel-netlink resolve
socket-default stroke updown xauth-generic<br>
Listening IP addresses:<br>
192.168.10.38<br>
192.168.3.107<br>
<br>
Connections:<br>
tunnel: %any...192.168.10.40 IKEv2<br>
tunnel: local: uses pre-shared key authentication<br>
tunnel: remote: [192.168.10.40] uses pre-shared key
authentication<br>
tunnel: child: dynamic === 192.168.10.0/32 TUNNEL<br>
Security Associations (1 up, 0 connecting):<br>
tunnel[1]: ESTABLISHED 41 seconds ago,
192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]<br>
tunnel[1]: IKEv2 SPIs: 53b251675b863a7d_i*
57d33cd8149f729f_r, rekeying in 41 minutes<br>
tunnel[1]: IKE proposal:
AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1536<br>
<br>
<br>
</div>
<div class="moz-cite-prefix">On Tuesday 16 January 2018 11:23
PM, Noel Kuntze wrote:<br>
</div>
<blockquote type="cite"
cite="mid:47eaf00a-0170-2c97-19c8-68cb10b2891f@thermi.consulting">
<pre wrap="">Hi,
Check the logs of the remote side.
It means the remote peer did not like the proposed traffic selector. It was probably outside of the network range that its own configuration allows, meaning narrowing failed.
Kind regards
Noel
On 16.01.2018 07:25, Sujoy wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi Noel,
Same strongswan 5.3.3 configuration working in my VM(client) to desktop server. But not working from my OpenWRT to Global IP used nated Linux server. Can you help me to solve this.
what means "received TS_UNACCEPTABLE notify, no CHILD_SA built"
Server config file.
Thanks & Regards
Sujoy
On Thursday 04 January 2018 03:38 AM, Noel Kuntze wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
Only on the responder.
If you use dpd and enforce UDP encapsulation, you do not need to open any ports on the initiator side.
Refer to the UsableExamples wiki page[1] for example configurations that are usable in the real world.
Kind regards
Noel
[1] <a class="moz-txt-link-freetext" href="https://wiki.strongswan.org/projects/strongswan/wiki/UsableExamples" moz-do-not-send="true">https://wiki.strongswan.org/projects/strongswan/wiki/UsableExamples</a>
On 28.12.2017 08:51, Sujoy wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi All,
We want to implement StrongSwan,with IPsec in OpenWRT. IPSec server will be running in CentOS and the OpenWRt router will connect to it using VPN. I have configured the server part, struggling to configure the client part. Do we need to open port 4500 for this first.
Anyone can suggest any solution for this.
</pre>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<br>
</blockquote>
<br>
</blockquote>
<br>
</blockquote>
<br>
</body>
</html>