<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi Noel and lists,</p>
<p>I am getting the following error while trying to connect from
OpwnWRT, the same server with other Linux clients are connected.
There are no logs available in the device. The device connected
but failed to establish <b>tunnel.</b> <br>
</p>
<p>it will be a big help for me, if anyone can help in solving this
issue. Thanks a lot once again for the support. <br>
</p>
<p><br>
</p>
<p><img src="cid:part1.69861983.8080EB8E@mindlogicx.com" alt=""
width="877" height="482"></p>
<div class="moz-signature"><br>
Server screen<br>
<br>
<img src="cid:part2.F0E89A37.B125FF7F@mindlogicx.com" alt=""
width="955" height="466"><br>
<br>
Thanks<br>
<br>
</div>
<div class="moz-cite-prefix">On Tuesday 16 January 2018 11:23 PM,
Noel Kuntze wrote:<br>
</div>
<blockquote type="cite"
cite="mid:47eaf00a-0170-2c97-19c8-68cb10b2891f@thermi.consulting">
<pre wrap="">Hi,
Check the logs of the remote side.
It means the remote peer did not like the proposed traffic selector. It was probably outside of the network range that its own configuration allows, meaning narrowing failed.
Kind regards
Noel
On 16.01.2018 07:25, Sujoy wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi Noel,
Same strongswan 5.3.3 configuration working in my VM(client) to desktop server. But not working from my OpenWRT to Global IP used nated Linux server. Can you help me to solve this.
what means "received TS_UNACCEPTABLE notify, no CHILD_SA built"
Server config file.
Thanks & Regards
Sujoy
On Thursday 04 January 2018 03:38 AM, Noel Kuntze wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
Only on the responder.
If you use dpd and enforce UDP encapsulation, you do not need to open any ports on the initiator side.
Refer to the UsableExamples wiki page[1] for example configurations that are usable in the real world.
Kind regards
Noel
[1] <a class="moz-txt-link-freetext" href="https://wiki.strongswan.org/projects/strongswan/wiki/UsableExamples">https://wiki.strongswan.org/projects/strongswan/wiki/UsableExamples</a>
On 28.12.2017 08:51, Sujoy wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi All,
We want to implement StrongSwan,with IPsec in OpenWRT. IPSec server will be running in CentOS and the OpenWRt router will connect to it using VPN. I have configured the server part, struggling to configure the client part. Do we need to open port 4500 for this first.
Anyone can suggest any solution for this.
</pre>
</blockquote>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<br>
</body>
</html>