<div dir="ltr">Hi,<div><br></div><div>I am new to strongswan and I am trying to establish connection from my laptop to a server.</div><div>I am behind a NAT.</div><div>This IPsec connection gets established and I can send traffic back and forth between the client and the server.</div><div><br></div><div>Now when I try to connect to the server from another laptop (also behind the same NAT) without IPsec, I cannot connect to it because the server sees the same IP coming out of the NAT and so applies the policy to encrypt the response being sent by the server to the client. And the client doesn't know how to decrypt the response and hence the connection fails.</div><div><br></div><div>So I decided to establish another IPsec connection from my second laptop to the server.</div><div>But I am not able to do that. Now is this because the NAT is sending the same IP for both the clients behind it? And so I cannot establish IPsec connection to the same server from two different clients which are behind the same NAT?</div><div><br></div><div>Is there anyway for establishing IPsec with the two clients behind a NAT?</div><div><br></div><div>Thanks</div><div>vijaya</div><div><br></div></div>